individual tests
Complete Physical Analysis (ASTM F1815) - Complete physical analysis including water permeability rate, pore space distribution, bulk density, particle density, and water retention.
(2-3 days)
Complete Particle Size Analysis (ASTM F1632 and Hydrometer Method) - Percent sand, silt, clay, and sand fractions.
(1 day)
Uniformity Coefficient (CU)
(1 day)
Organic Matter Analysis (ASTM F1647 Method A) - Determined by loss on ignition.
(1 day)
pH and Lime Recommendations (ASTM D4972 Method A) - Determined using water and calcium chloride solution.
(1 day)
Particle Shape (ASTM F1632)
(1 day)
Particle Density (D854 Method A)
(1 day)
Moisture (ASTM D2974 Method A)
(1 day)
(2-3 days)
Complete Particle Size Analysis (ASTM F1632 and Hydrometer Method) - Percent sand, silt, clay, and sand fractions.
(1 day)
Uniformity Coefficient (CU)
(1 day)
Organic Matter Analysis (ASTM F1647 Method A) - Determined by loss on ignition.
(1 day)
pH and Lime Recommendations (ASTM D4972 Method A) - Determined using water and calcium chloride solution.
(1 day)
Particle Shape (ASTM F1632)
(1 day)
Particle Density (D854 Method A)
(1 day)
Moisture (ASTM D2974 Method A)
(1 day)